Tips for an effective and safe tire change at home
Changing tires at home isn't hard, but the right tools and good routines make it faster and safer. This is the process our technicians follow.
Step by step
Park on a flat, solid surface
Apply the parking brake. Avoid gravel if you can, unless you've got a solid garage jack.
Loosen the bolts half a turn
Use a breaker bar or wheel brace while the wheel is still on the ground. If a bolt is stuck, better to know before the car is up.
Check the tires you're fitting
Look for cuts, bulges and nails. We recommend at least 3 mm tread on summer tires and 4.5 mm on winter tires. If the tires have a rotation direction, put them on the right side.
Put the car in service mode
Only for cars with air suspension: look for "jack mode" in the settings.
Lift the car with a garage jack
Use the jack point from the owner's manual. On an electric car never anywhere else: a damaged battery case is expensive.
Keep clear
No body parts under the car while it is on the jack.
Change the wheels
An impact wrench is quick, but only run the bolts down with it. Finish by hand.
Lower the car and tighten with a torque wrench
The right torque is in the owner's manual. It protects the rim and keeps the bolts from working loose. A basic torque wrench costs a few hundred kroner.
Check the tire pressure
The right pressure is on the door pillar or the fuel cap. Small battery compressors need to rest now and then, so let it run while you do the next wheel.
Retighten after 30–50 km
Important whoever changed the tires. Use a torque wrench here too.
When is it time to switch between summer and winter tires?
A good rule of thumb: once the temperature stays below 7 degrees, it's time for winter tires. Once it stays above 7 degrees, the summer tires can go on.

Services
See available times at your address
4.8 out of 5 stars from over 8,500 ratings